digital fabrication machines, such as 3D printers, are tools that help designers work and create models very accurately. the software used to create the 3D models however is often quite complex and requires a lot of time. the difficulty behind this is due to the software’s graphical user interface. this kind of interface creates a barrier between the user and computer. to solve this problem, a physical interface has been created that allows designers to create 3D models in a matter of minutes.

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
user with interface 1

 

 

belgium designer simon van pottelbergh has developed ‘TAC.TILES’, an interface made out of 15 modules. these modules are able to control the basic geometry, shape and parameters through physical manipulation of the buttons. the different modules allow the user to perform actions like pulling, pushing, twisting and bending. through the performance of these actions the shape of the 3D model can be controlled.

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
interface with screen

 

 

‘TAC.TILES’ is a modular product for two main reasons. first, because users don’t need all 15 modules at all times. by only assembling those that are needed, a clean interface is created. the second reason is to allow users to choose a position arrangement of different modules, allowing the possibility to have a control panel purely based on personal preference. each module is equipped with a magnetic USB port. this way the modules can easily snap together, not only connecting the modules physically, but also connecting digitally with each other and the computer.

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
assembled modules 1

 

 

this physical interface allows users to create 3D models in a fast and intuitive way. the main purpose is form finding, a stage at the beginning of a design process where various shapes are generated in a short period of time. the interface is therefore used to create abstract figures and not ready yet to use for models or products.

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
user with interface 2

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
magnetic connection

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
user with interface 3

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
assembled modules 2

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
assembled modules 3

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
assembled modules 4

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
assembled modules 5

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
user with interface 4

simon van pottelbergh explores alternative interfaces for 3D printing with TAC.TILES
interface without screen

 

 

designboom has received this project from our ‘DIY submissions‘ feature, where we welcome our readers to submit their own work for publication. see more project submissions from our readers here.

 

edited by: apostolos costarangos | designboom